JET_33465_com.dat  ITER Profile Database;  datasets prepared 
   by Pam Stubberfield, Bernard Balet JET, July 1996

   JET shot 33465 is an ELMy H-mode shot obtained in the new JET pump divertor
   configuration. This pulse ( 1.0T, 1.0MA ) is part of a series of rho* scaling
   experiments relevant for ITER. Plasma is deuterium.
   The plasma is in a single-null X-point configuration with the ion gradB
   drift pointing towards the X-point.
   Some 1.39MW of 80KV/D neutral beam heating is turned on at 62 secs
   and a further 1.38MW of 80KV/D at 63 secs. All heating ceases at 64.0 secs.

   The dataset files in this subdirectory were prepared from TRANSP run J305 
   taking into account the up-down asymmetry of the plasma, run by B.Balet on 
   4 July 1996 on the IBM JAC-2 RS6000 workstation based on JET shot 33465 
   taken on 17 January 1995. 
   All these files have been prepared according to the Standard list of
   Variables and File Format manual by D.Boucher (7 December 1996). Tools
   to produce these files from a TRANSP run were recently updated by
   Stan Kaye of PPPL. These have only been modified slightly to
   run on the RS6000 UNIX workstation, to add 40 secs to all time axes and to
   include elongation and triangularity.
   There are 23 1-D Ufiles and 30 2-D Ufiles. Variables GRHO1 and GRHO2 are
   now stored on flux boundaries and 2-D profiles for CURTOT, NM1(D), NIMP
   BPOL and QOHM are provided. 

   In the file JET_33465_0d.dat data is given at 63.76 secs.
   At that time, there is 2.77MW of beam heating . The plasma is 
   in a steady ELMy H-mode phase.

   Values for kappa and delta in the 0d, 1d and 2d files are from the TRANSP
   output derived from the boundary input definition provided by EFIT.
        kappa = (Zmax-Zmin)/(Rmax-Rmin);   delta = (RGEO - R(Zmax))/a
   XPLIM is from XLOC ; SEPLIM is given by EFIT.
   PLTH is defined by WTH/TAUTH coming directly from TRANSP output and not 
   as defined in the standard list of variables. The 1d files for IP,VSURF 
   and IBOOT have negative values as normal for JET. 
  

   Some comments on this particular TRANSP run J305;
   25ms analysis time resolution; VMEC equilibrium LEVGEO = 6  
   Up-down asymmetric boundary definition obtained from the EFIT program
   No sawteeth events are taken into account in the simulation for
   redistribution of the fast ions and of the current.
   Ti profile as Te.
   Te profile vs. radius is from the LIDAR measurements mapped on the
   outer half of the plasma midplane.
   Ne profile vs. radius is also from LIDAR measurements mapped as Te.
   2D radiation profile is used in the analysis. 
   No Rotation velocity profile from CX measurements was available.
   Zeff profile from Visible Bremsstrahlung measurements is used.
   Impurity species assumed to be carbon
   Edge ptcl confinement time is set to 1s.
   Bootstrap current on ; impose q(0) = 1.1 to start
   Neoclassical beam driven current